Bolt Type RTD PT100
These are standard bolts (stainless steel, unless requested otherwise), with the sensing element drilled into the head of the bolt to be just short of the end of the thread. Typical diameters are M8, M10, or M12 and lengths of 30 to 100mm.
NEPEAN Power’s Resistance Temperature Detectors (RTD’s) have a well deserved reputation in the industry for their superior stability and accuracy.
RTD PT100 sensors are an industry standard sensor made of platinum, which has a 100 ohm resistance at 0°C and a temperature co-efficient (alpha) of 0.00385 ohm/°C.
Probe Type RTD PT100
Probes come in various sizes: diameter, length, mounting type and mounting thread, straight or right angle mounted. We also provide customized solutions. Please specify diameter and length from mounting point, standard diameters would be 3, 6 and 8mm with lengths up to 1M. Compression fitting allowing the probe to be slide in or out.
Washer Type RTD PT100
This type of probe can be mounted under a bolt head like a washer. Typical sizes are M6 to M20. These are supplied as flying lead type only.
Head Type RTD PT100
Head types can be purchased with or without the 4-20mA transmitter.
X0351 – With Thread
Supplied complete with X0429 transmitter.
X0352 – No Thread (suits compression fitting)
Supplied complete with X0429 transmitter. Compression fitting not included.
Compression Fitting
RTD sensors contains air compression ferrule to accommodate your desired probe diameter. The internal diameter is 3 or 6mm, and the mounting thread (BSP) typically 1/4BSP. For mounting of probe type RTD’s into various ap- plications.